Remote control lubrication systems from ATS are designed to reduce power and lubricant use, they can be used either as a single point lubrication installation, or as a multi point lubrication system to provide the most cost-effective lubrication solution available.
Bộ Điều Khiển Từ Xa Remote Control Dùng Cho Bơm Mỡ Tự Động ATS
Đánh giá bài viết!
[Đánh giá: 4 ]
Remote Control Automatic Lubricators
Fitted with a special circuit board, the remote control lubricator will function only during required periods, which are pre-determined by the user.
The lubricator’s circuit board connects to an external dry contact (a type of switch which needs no power). This switch connects by either wi-fi or bluetooth to the users computer.
The user can then programme times when the lubricator will or will not operate. For example, if a plant runs between 7am and 6pm, and all machinery shuts down for 90 minutes during lunch, the luber can be programmed to go into pause mode for lunch hours as well as from 6pm to 7am the following morning.
The motor-driven lubricator will dispense as normal, for the entire time the switch is closed. When the switch receives a signal from the controlling device the contact opens, pausing the lubrication cycle.
When the lubricator comes back online it will continue from the exact point it was paused during the current cycle.
Features
- – easy to install & use
- – LED performance indicator
- – Connect to computer, laptop, tablet
- – Wireless control
Benefits
- – Lubricates only when machinery is running
- – Save lubricant
- – Save power
- – Independent control of different lubrication systems
- – Easy decommissioning of lubrication systems
Remote control lubricator installation instructions
The remote control circuit board is fitted to the lubricator at the manufacturing stage, making the system incredibly simple to install.
If you are already using ATS Electro-Lube’s motor-driven units the circuit boards can be retro-fitted very easily, quickly enabling your lube system to be controlled remotely. For advice give us a call.
- – Install lubricator as per instructions
- – Connect the circuit board wires to a dry contact (not supplied by ATS)
- – Sync the dry contact to your computer, laptop, or tablet
- – Programme lubricator dispense cycles
Thông tin liên hệ
Công Ty TNHH Thương Mại Và Dịch Vụ Công Nghiệp Việt Nhật
Văn Phòng: Số 63, Ngõ 230 Mễ Trì Thượng, Q. Nam Từ Liêm, TP Hà Nội
Tel : 0962 599 993 – 0946 945 056
Email: vietnhat.hn01@gmail.com
Website: thietbibommo.vn
Hãy là người đầu tiên nhận xét “Bộ Điều Khiển Từ Xa Remote Control Dùng Cho Bơm Mỡ Tự Động ATS”
Bạn phải bđăng nhập để gửi đánh giá.
Đánh giá
Chưa có đánh giá nào.