Pulse Controlled Automatic Lubricators
ATS Electro-Lube’s pulse controlled lubrication systems offer an efficient cost-saving method for machinery maintenance.
The pulse control mechanism is ideal for any industrial equipment with intermittent operation, and works to shut down the automatic lubrication systems during periods of inactivity.
How pulse controlled lubricator work
This control method uses a magnet and motion sensor. When the magnet passes the motion sensor a certain number of times the lubrication cycle is triggered.
The exact number of cycles is programmed via DIP switches on the sensor.
For example if you choose 50 cycles, the pulse lubrication system will only dispense when the magnet has passed the sensor 50 times. Thus if the plant shuts down for the evening the next lubrication cycle will only begin when the magnet starts moving again the next morning.
A performance indicator LED shows operational status of the pulse lubrication system, and a blue light will flash every time the sensor is triggered, indicating correct operation.
We also offer motion controlled lubrication systems, which operate in their normal dispense cycle for as long as the magnet passes the motion sensor. When machinery is shut down the lubrication cycle is paused.
- – LED performance display
- – custom programmes
- – easy to install & use
- – works with most moving machinery
- – save battery life or power
- – minimise lubricant use
- – never lubricate idle machinery
- – extend system longevity
Applications for pulse controlled lubricators
Pulse controls can be fitted to any application in which a part of the machinery passes the lubricator, including the following examples…
- – rotating parts
- – screw turbines
- – screw pumps
- – pistons
- – chains/hoists
- – winches
- – belts
- – fans
How to install pulse controlled lubrication systems
Our pulse controlled lubricators are incredibly simple to install, and after installation no more upkeep is required.
- – install lubricator as per instructions
- – attach magnet to moving part of machinery
- – Fix motion sensor near to machinery
- – set number of cycles
- – TEST- start machinery and ensure system operates at correct intervals
Thông tin liên hệ
Công Ty TNHH Thương Mại Và Dịch Vụ Công Nghiệp Việt Nhật
Văn Phòng: Số 63, Ngõ 230 Mễ Trì Thượng, Q. Nam Từ Liêm, TP Hà Nội
Tel : 0962 599 993 – 0946 945 056