Oil Lubrication Brushes
ATS supply a range of different sized oil lubrication brushes for applications in which oil must be applied to moving machinery.
All of our automatic lubricators can be filled with oil. We also manufacture the Titan Oiler™, an oil specific lubricator with a large 1.4L oil reservoir.
Lubricating oil brushes reduce corrosion and wear by applying lubricant into the correct moving components, and also help to remove contaminants, further reducing the chance of component failure. In turn this correct application method reduces friction and wear, lowering operational costs as well as repair costs.
When to use a lubricating oil brush
Oil brushes are essential for certain types of application, for example chains, types of conveyor, and chain lifts.
Many companies use an ‘oil drip’ system, whereby a pipe drips oil onto the application. This can work for very narrow chains, but for optimal coverage, and anything wider than a few millimetres, we strongly advise the use of an oil brush.
Oil brushes work best when fitted directly before the sprockets. The oil is applied and then the sprocket helps to force oil down into the links and pins.
With our brass fittings a lubricating oil brush can be fitted directly onto our single point lubricators when mounted directly above a chain. For multi-point chain lubrication the unit can be remotely mounted and lubrication hoses run to the oil brushes. Our motor-driven lubricators can supply up to 12 lubricating oil brushes.
The benefits of using an lubricating oil brush
– connect direct to lubricator or via hosing
– service lubrication system during machinery operation
– 24 hours lubrication for continually moving machinery
– one time set up and easy maintenance
– helps lubricant penetrate right into sprockets and pins
– Use with single point or multipoint installations
Buy lubricating oil brushes
We stock oil brushes in a range of sizes, from 10mm wide up to 40mm wide. We also supply fittings and hoses to connect from lubricator to oil brush.
Our oil brushes come with a 1/8’’ male thread, so you’ll want to include this fitting with your order.
We only supply brushes up to 40mm wide because for chains wider than this we strongly recommend using multiple brushes across the chain. This ensures that the entire width of the chain is lubricated.
How to install lubricating oil brushes
Oil brushes are simple to install. You can either mount the oil brush directly into one of our compact lubricators, or mount the lubricator remotely. What will govern this is your machinery set-up, and where you can fit the lubricator’s bracket.
1.Direct mounting of oil brush into lubricator
– Fit the lubricator bracket: fit the lubricator bracket directly to machinery at appropriate height that brush will contact chain
– Install lubricator: fit the lubricator into the bracket
– Fit lubricator/brush fitting: Use 1/2’’F x 1/8’’F fitting (for Mini & Micro Luber use 1/4’’F x 1/8’’F)
– Fit brush: Now simply screw the oil brush into the 1/8’’ female thread
– Activate lubricator: turn on & set the lubricator as per the instructions
2.Remote mounting of oil brush
– Fit the lubricator bracket: fit the lubricator bracket to the wall or appropriate surface
– Install lubricator: fit the lubricator into the bracket
– Fit lubricator/hose fitting: Use 1/2’’F x 3/8’’OD compression fitting (for Mini & Micro Luber use 1/4’’F x 1/8’’F)
– Fit hose: Push tubing into 3/8’ compression fitting, tighten nut – pipe inserts should be used inside flexible tubing
– Run hose: tubing should be properly fixed, with clips, avoiding any loose or sagging runs
– Connect brush: Using a 3/8’’OD compression x 1/8’’F fitting connect the tubing to the brush, fix securely
NOTE: if hose and brush cannot be securely fixed along entire run then solid piping should be used.
Thông tin liên hệ
Công Ty TNHH Thương Mại Và Dịch Vụ Công Nghiệp Việt Nhật
Văn Phòng: Số 63, Ngõ 230 Mễ Trì Thượng, Q. Nam Từ Liêm, TP Hà Nội
Tel : 0962 599 993 – 0946 945 056
Email: vietnhat.hn01@gmail.com
Website: thietbibommo.vn
Đánh giá
Chưa có đánh giá nào.